Phase II Rockwell Hardness Tester – 900-331

Sale!
Phase II Rockwell Hardness Tester - 900-331

Phase II Rockwell Hardness Tester – 900-331

Original price was: $2,397.00.Current price is: $1,594.98.

57 in stock

SKU: 900-331 Category:

Description

Phase II Rockwell Hardness Tester – 900-331

This hardness tester comprises the very best in state of the art design along with dynamic precision only found at Phase II. The 900-331 Rockwell scale hardness tester is easy to operate, yet engineered to obtain highly sensitive and accurate readings. Conforming to ASTM E-18 Rockwell Hardness standards, the 900-331 tester will offer unmatched repeatability in all standard Rockwell Hardness scales (table shown below). A perfect, rugged performer suited for any environment including heat treat facilities, tool rooms, workshops, laboratories and inspection labs. Lifetime technical support is included on all Phase II Hardness Testers. So test away with confidence and a level of accuracy you will only find at Phase II.

Features:

  • Direct analog dial reading
  • Advanced design, easy to operate
  • Engineered to obtain highly sensitive and accurate readings
  • Conforms to ASTM E-18
  • Perfect for laboratories, workshops, tool rooms, inspection labs, etc.

Specifications:

Minor Load 10Kgf
Major Load 60Kgf, 100Kgf, 150Kgf
Test Force Application Dead Weight
Test Force Control Hydraulic Dashpot System
Results Display Analog Dial Gage
Vertical Capacity 6.7 in.
Throat Depth 6.6 in.
Height 30.0 in.
Width 8.50 in.
Depth 20.0 in.
Shipping Weight 242 lbs.

Accessories:

  • C-scale Diamond Indentor
  • 1/16 Ball Indentor
  • 3- HRC Test Blocks
  • 1- HRB Test Block
  • 1-HRA Test Block
  • Test Table 5.87 (150mm)
  • Flat Anvil 2.5 (63mm)
  • Spot Anvil .38: (10mm)
  • Std. Vee Anvil
  • Accessory Case
  • Dust Cover
ScaleSymbol

Indenter Type Ball dimensionsindicate diameter

 PreliminaryForceN (kgf) Total ForceN (kgf) Typical Application
A Spheroconical Diamond 98.07 (10) 588.4 (60) Cemented carbides,thin steel and shallowcase hardened steel
B Ball 1/16 (1.588mm) 98.07 (10) 980.7 (100) Copper alloys,soft steels, alum. Alloys,malleable iron, etc.
C Spheroconical Diamond 98.07 (10) 1471 (150) Steel, hard cast irons,pearltic malleable iron, titanium,deep case hardened steel& other materialharder than HRB 100
D Spheroconical Diamond 98.07 (10) 980.7 (100 Thin steel and mediumcase hardened steel andpearlitic malleable iron
E Ball 1/8″ (3.175mm) 98.07 (10) 980.7 (100 Cast iron, aluminum& magnesium alloysand bearing metals
F Ball 1/16″ (1.588mm) 98.07 (10) 588.4 (60) Annealed copper alloys,and thin soft sheet metals
G Ball 1/16″ (1.588mm) 98.07 (10) 1471 (150) Malleable irons,copper-nckel-zincand cupronickel alloys
H Ball 1/8″ (3.175mm) 98.07 (10) 588.4 (60) Aluminum, zinc and lead
K Ball 1/8″ (3.175mm) 98.07 (10) 1471 (150) Bearing metals and othervery soft or thin materials.Use smallest ball andheaviest load that doesnot give anvil effect
L Ball 1/4″ (6.350mm) 98.07 (10) 588.4 (60)
M Ball 1/4″ (6.350mm) 98.07 (10) 980.7 (100)
P Ball 1/4″ (6.350mm) 98.07 (10) 1471 (150)
R Ball 1/2″ (12.70mm) 98.07 (10) 588.4 (60)
S Ball 1/2″ (12.70mm) 98.07 (10) 980.7 (100)
V Ball 1/2″ (12.70mm) 98.07 (10) 1471 (150)

Related products