Auto-Air 4200 Series Transparent Colors – 4250 Transparent Beige

Description

Above: 4250 Transparent Beige over 4001 Sealer White
Below: 4250 Transparent Beige over 4002 Sealer Dark

Graphic colors for airbrushing murals, fades and graphics over abase color. Transparent Colors work well with smaller tip-sizedairbrushes for finely detailed artwork.

Best applied over a base color or 4000 Series Sealer.

Works well with all tip-sized airbrushes. Transparent Colors lacksolids present in other colors, making the Transparent Colors idealfor use with large & small tip-sized airbrushes as the viscosity isquickly lowered when reduced for proper atomization at lower PSIsettings.

Over-reduce in greater amounts for use with airbrush tip sizes of0.2mm and smaller.

Reduction can far exceed our recommendations without affecting thepaint’s adhesion due to minimal amount of paint applied with asmall tip-sized airbrush.

Mix with 4001 Sealer White to create a color-keyed sealer base forimproved coverage of base color. Transparent Colors can be used astoners to other Auto Air Colors for custom blends.

Colors are translucent after curing.

Transparent Colors will cover over underlying images to someextent. For a completely transparent finish, use the 4600 SeriesCandies.

Transparent Colors can be used as base colors. Apply in multiple,light coats when doing so to avoid runs.

A deep finish is created when used as a base color due to color’shue shifting from light to dark over direct & side-views.

Mainly intended for use with an airbrush.

Transparent Colors’ low viscosity may not be suited for use withlarger spray guns.

Mini-Spray Gun: 0.8 – 1.0mm tip
Airbrush: All sizes, reduce as needed

Reduce:
Spray-gun:@ 5 – 10% per volume with 4011 Flash Reducer
Airbrush:@ 10 – 25% per volume with large tip sizes and up to /greater than 100% per volume with small tip sized airbrushes